G-NET X Series GX-PES-8TPH2TX unmanaged high performance 10/100M POE Switch provides 8x10/100Base-TX POE ports with 2x10/100Base-TX RJ45 uplink ports.The POE port 1 supports IEEE802.3bt standard HiPoE which can supply up to max 60W power,POE port 2-8 support IEEE802.3af/at PoE standards,each POE port can supply up to max 30W power.It can automatically detect and supply power for the IEEE 802.3af/at/bt compliant Powered Device(PD),like IP camera, IP phone, wireless AP,etc.To the connected devices which not support PoE,it will auto stop supplying power.All ports support wire speed switch transmission.It is a reliable and economic choice for your security system,electronic power system and traffic system.



  • Support 8x10/100Base-TX POE ports and 2x10/100Base-TX RJ45 uplink ports
  • PoE Port 1 support IEEE802.3bt,power supply:60W(Max)
  • PoE Port 2-8 support IEEE802.3af/at,power supply:30W(Max)
  • PoE port supports to auto detect and supply power for the IEEE 802.3af/at/bt compliant PD,auto power supply/power cutting
  • Flow Control Type: Full duplex adopts IEEE 802.3x standard, half duplex adopts back pressure standard
  • Plug and play,10/100M,Full/Half duplex mode,non-blocking forwarding,MDI/MDI-X auto negotiation
  • All ports support exchange at wirespeed
  • Perfect protection mechanism as lightning protection,over-current, over-voltage, electrical surge and short circuit
  • Each port is equipped with independent circuits and fuses, which can ensure the normal operation of other ports even if individual circuits fail
  • LED indicators monitor working status,supporting simple trouble shooting
  • Fanless design,natural cooling
  • Desktop,easy to install and use



Fixed Port 8x10/100Base-TX POE ports+2x10/100Base-TX RJ45 ports
Standard IEEE802.3 10Base-T IEEE802.3u 100Base-TX
IEEE802.3x flow control
IEEE 802.3af/at/bt
Switch Properties Switching Capacity: 2Gbps
MAC Address Table: 1K
Packet Buffer Size:768K
Packet Forwarding Rate: 1.44Mpps
Switching mode: Store and Forward(full wirespeed)
Network Medium 10BASE-T: Cat3,4,5 UTP(≤100 meters)
100BASE-TX: Cat5 UTP or better(≤100 meters)
Flow Control Full duplex adopts IEEE 802.3x standard, half duplex adopts back pressure standard
Uplink Port 2x10/100Base-TX RJ45
POE Description POE Port:8x10/100Base-TX RJ45 PSE ports POE Standard:PoE Port 1 IEEE802.3af/at/bt
PoE Port 2-8 IEEE802.3af/at
Power Pin Assignment: PoE Port 1 1/2/4/5+,3/6/7/8-(4 Pairs)
PoE Port 2-8 1/2+,3/6-(2 Pairs)
POE Power Output:PoE Port 1 60W Max,PoE Port 2-8 30W Max Total PoE Power Budget:Max 120W
Transmission Distance Twisted pair: 0-100m(CAT5e/CAT6)
Power Requirements Power input:AC100-240V,50/60Hz
Standby Power Consumption:≤3W
LED Indicator P:Power LED S:Extend Mode LED V:VLAN Mode LED
PoE/Orange:Port 1-8 PoE LED
Link/Green:Port 1-8 10/100M Ethernet Link LED
Mechanical Case: Metal(IP30 Protection Grade) Cooling way: Natural cooling,fanless design Dimension: 210x150x35mm(LxWxH) NW/G.W: 0.8Kg/1.2Kg
Lightning protection level 3KV 8/20us
Environmental Working Temperature: -10°C to 55°C
Storage Temperature:-40°C to +75°C Working Humidity: 5%~90% (non-condensing) Storage Humidity: 5% ~ 95%(non-condensing)

Function Switch Description

Switch Mode Description


Standard Exchange Mode

All ports communicate freely, which is suitable for common data transmission environment



The downlink ports are isolated from each other and can only communicate with the uplink ports to prevent broadcast storm,virus attack and other network failures


Extend Mode

POE port 1-8 extend to 250meters at 10Mbps

Ordering Information

Model Description
GX-PES-8TPH2TX 8x10/100Base-TX POE PSE+2x10/100Base-TX RJ45,total power:120W,1st POE port support 60W HiPoE