G-NET X Series GX-PES-1FX4TP high performance unmanaged 10/100M POE Ethernet Switch provides 4x10/100Base-TX POE ports with 1x100Base-FX Fiber port.The POE port supports IEEE802.3af/at PoE standards,each POE port can max supply up to 30W power.It can automatically detect and supply power for the IEEE 802.3af/at compliant Powered Device(PD),like IP camera, IP phone, wireless AP,etc.To the connected devices which not support PoE,it will auto stop supplying power.It also supports IEEE 802.3,,IEEE 802.3u,IEEE 802.3x standard  with 10/100M,full/half-duplex, and MDI/MDI-X auto negotiation,All ports support wire speed switch transmission.It is a reliable and economic choice for your security system,electronic power system and traffic system.


  • Support 4x10/100Base-TX POE ports and 1x100Base-FX Fiber port
  • Support IEEE802.3af,each port power supply:15.4W(Max)
  • Support IEEE802.3at,each port power supply:30W(Max)
  • Each PoE port supports to auto detect and supply power for the IEEE 802.3af/at compliant PD,auto power supply/power cutting
  • POE Pin Assignment:1/2+,3/6-(End-Span)
  • Flow Control Type: Full duplex adopts IEEE 802.3x standard, half duplex adopts back pressure standard
  • Plug and play,10/100M,Full/Half duplex mode,non-blocking forwarding,MDI/MDI-X auto negotiation
  • All ports support exchange at wirespeed
  • Perfect protection mechanism as lightning protection,over-current, over-voltage, electrical surge and short circuit
  • Each port is equipped with independent circuits and fuses, which can ensure the normal operation of other ports even if individual circuits fail
  • LED indicators monitor working status,supporting simple trouble shooting
  • Fanless design,natural cooling
  • Desktop,easy to install and use


Fixed Port 4x10/100Base-TX POE ports and 1x100Base-FX Fiber port
Standard IEEE802.3 10Base-T IEEE802.3u 100Base-TX/FX IEEE802.3x flow control IEEE 802.3af/at
Switch Properties Switching Capacity: 1Gbps MAC Address Table: 1K Packet Buffer Size:768K Packet Forwarding Rate: 0.72Mpps Switching mode: Store and Forward(full wirespeed)
Network Medium 10BASE-T: Cat3,4,5 UTP(≤100 meters) 100BASE-TX: Cat5 UTP or better(≤100 meters)
Flow Control Full duplex adopts IEEE 802.3x standard, half duplex adopts back pressure standard
Uplink Port 1x100Base-FX(1x9 Optical Transceiver)
POE Description POE Port:4x10/100Base-TX RJ45 PSE ports POE Standard:IEEE802.3af, IEEE802.3at Power Pin Assignment:1/2+,3/6- POE Power Output:Max 30W per port Total PoE Power Budget:Max 65W
Twisted pair: 0-100m(CAT5/CAT5e) Fiber port:0-120km
Power Requirements Power input:AC100-240V,50/60Hz Total Power:65W Standby Power Consumption:≤3W
LED Indicator Power:Power LED 5:Port 5 Fiber Link LED PoE/Orange:Port 1-4 PoE LED Link/Green:Port 1-4 10/100M Ethernet Link LED
Mechanical Case: Metal(IP30 Protection Grade) Cooling way: Natural cooling,fanless design Dimension: 190x130x35mm(LxWxH) NW/G.W: 0.6Kg/0.9Kg Installation:Desktop
Lightning protection level 3KV 8/20us
Environmental Working Temperature: -10°C to 55°C Storage Temperature:-40°C to +75°C Working Humidity: 5%~90% (non-condensing) Storage Humidity: 5% ~ 95%(non-condensing)
MTBF 100,000 hours

Ordering Information

Model Description
GX-PES-1FX4TP-SC20S 4x10/100Base-TX POE PSE+1x100Base-FX,dual
fiber,20KM,SC,total power:65W
GX-PES-1FX4TP-SC20SA/B 4x10/100Base-TX POE PSE+1x100Base-FX,single fiber,20KM,SC,total power:65W