Trang chủ » X-SERIES- PoE Converter Switch » GX-PES-8TP2TX
GX-PES-8TP2TX
GX-PES-8TP2TX

Overview

G-NET X Series GX-PES-8TP2TX unmanaged high performance 10/100M POE Ethernet Switch provides 8x10/100Base-TX POE ports with 2x10/100Base-TX RJ45 uplink ports.The POE port supports IEEE802.3af/at PoE standards,each POE port can max supply up to 30W power.It can automatically detect and supply power for the IEEE 802.3af/at compliant Powered Device(PD),like IP camera, IP phone, wireless AP,etc.To the connected devices which not support PoE,it will auto stop supplying power.It also supports IEEE 802.3,,IEEE 802.3u,IEEE 802.3x standard with  10/100M,full/half-duplex,  and MDI/MDI-X auto negotiation,All ports support wire speed switch transmission.It is a reliable and economic choice for your security system,electronic power system and traffic system.

 

Features

  • Support 8x10/100Base-TX POE ports and 2x10/100Base-TX RJ45 uplink ports
  • Support IEEE802.3af,each port power supply:15.4W(Max)
  • Support IEEE802.3at,each port power supply:30W(Max)
  • Each PoE port supports to auto detect and supply power for the IEEE 802.3af/at compliant PD,auto power supply/power cutting
  • POE Pin Assignment:1/2+,3/6-(End-Span)
  • Flow Control Type: Full duplex adopts IEEE 802.3x standard, half duplex adopts back pressure standard
  • Plug and play,10/100M,Full/Half duplex mode,non-blocking forwarding,MDI/MDI-X auto negotiation
  • All ports support exchange at wirespeed
  • Perfect protection mechanism as lightning protection,over-current, over-voltage, electrical surge and short circuit
  • Each port is equipped with independent circuits and fuses, which can ensure the normal operation of other ports even if individual circuits fail
  • LED indicators monitor working status,supporting simple trouble shooting
  • Fanless design,natural cooling
  • Desktop,easy to install and use
 

Specification

Fixed Port 8x10/100Base-TX POE ports+2x10/100Base-TX RJ45 ports
Standard IEEE802.3 10Base-T IEEE802.3u 100Base-TX
IEEE802.3x flow control
IEEE 802.3af/at
Switch Properties Switching Capacity: 2Gbps MAC Address Table: 1K Packet Buffer Size:768K
Packet Forwarding Rate: 1.44Mpps
Switching mode: Store and Forward(full wirespeed)
Network Medium 10BASE-T: Cat3,4,5 UTP(≤100 meters)
100BASE-TX: Cat5 UTP or better(≤100 meters)
Flow Control Full duplex adopts IEEE 802.3x standard, half duplex adopts back
pressure standard
Uplink Port 2x10/100Base-TX RJ45
POE Description POE Port:8x10/100Base-TX RJ45 PSE port POE Standard:IEEE802.3af, IEEE802.3at Power Pin Assignment:1/2+,3/6-
POE Power Output:Max 30W per port Total PoE Power Budget:Max 120W
Transmission Distance Twisted pair: 0-100m(CAT5e/CAT6)
Power Requirements Power input:AC100-240V,50/60Hz
Standby Power Consumption:≤3W
LED Indicator

 

 P:Power LED S:Extend Mode LED V:VLAN Mode LED
PoE/Orange:Port 1-8 PoE LED
Link/Green:Port 1-8 10/100M Ethernet Link LED
Mechanical Case: Metal(IP30 Protection Grade) Cooling way: Natural cooling,fanless design Dimension: 210x150x35mm(LxWxH) NW/G.W: 0.8Kg/1.2Kg
Installation:Desktop
Lightning protection level 3KV 8/20us
Environmental Working Temperature: -10°C to 55°C Storage Temperature:-40°C to +75°C
Working Humidity: 5%～90% (non-condensing)
Storage Humidity: 5% ~ 95%(non-condensing)
MTBF 100,000 hours
Warranty 3 years

 

Function Switch Description

Switch Mode Description

N

 Standard Exchange Mode All ports communicate freely, which is suitable for common data transmission environment

V

VLAN Mode

The downlink ports are isolated from each other and can only communicate with the uplink ports to prevent broadcast storm,virus attack and other network failures

S

Extend Mode

POE port 1-8 extend to 250meters at 10Mbps

 

SẢNPHẨM CÙNG LOẠI
|« « 1 2 3 4 5 » »| ( Page 1 of 7 )
↑